manufacture Baotou GRC Roman Column What is the reason that the mold is needed, and the mold has fewer times of mold turnover in the process of use? Let's get to know each other.
GRC Too much silicone oil was added to the mold of Roman column during manufacturing, which damaged the molecular weight of silicone, so the mold would have less mold turnover times and not be durable. If the small patterns of the product are made more complex, and the mold is opened with silicone with high hardness, the mold will be turned less frequently, because the silicone will be brittle and easy to break when it is good.
On the contrary, if the products manufactured use silica gel with low hardness to make molds, the effect is not satisfactory. As the silica gel is too soft, its tensile strength and tearing strength will decrease, and its modulus will also increase, so the number of mold turns will decrease.
The resin of GRC Roman column mold is of good quality. There is no difference between good and bad silica gel, only suitable and unsuitable. This will not happen if we use the mold made of silica gel suitable for the hardness of the product.
*Disclaimer: The reprinted content is from the network. If you have any objection, please contact us in time, and the network will delete it.
