The foundation frame structure used, such as brick foundation or steel frame, concrete foundation frame or a combination of the three. Aboveground Baotou GRC The European style components shall be subject to corresponding foundation treatment, while the indoor GRC European members shall be calculated according to the ground and load conditions (including ground beam and steel beam, column and support plan). The basic framework summarizes the shape of natural mountain peak as a truss with internal geometric shape, which serves as the support system of the whole mountain peak, and describes the shape of the mountain peak on this basis. During construction, attention should be paid to the shape of the mountain peak, because the underframe usually has several shapes. During the construction, the structural density of the support system shall be densified on the basis of the foundation frame to make the shape of the structure as close as possible to the shape of the planned mountains.
Steel mesh brick underframe can be installed or not. In general, it is necessary to install wire mesh for large vehicle bodies. The wire mesh shall be made of materials easy to hang mud, and the wire mesh and underframe shall be firmly tied together. According to the planning model, the steel mesh is processed and shaped with wooden hammer and other things to make it into shape.
Cement mortar surface sculpture is the modeling process of stone mountain. In the process of description, fibrous additives can be added to GRC European members to increase the tensile strength of the surface and reduce cracks. M7.5 cement mortar is usually used to start shaping to form large peaks and undulations, as well as natural shapes of stone patterns, faults, holes, sky, walls, terraces and Xi. Then M15 cement mortar is used to describe the natural shape of mountains and rocks. Texture characterization requires multiple tests, repeated studies, and modifications during shaping. After all, each part should have a complete stone texture appearance.
GRC European components are colored according to the requirements of stone color by brushing or spraying water-insoluble color. Pigments and stone powder can also be added to the mortar to produce the desired stone color.
*Disclaimer: The reprinted content is from the network. If you have any objection, please contact me in time, and I will delete it.
