-
At present, the main way to deal with the cracking problem is to improve the material performance, installation, structure and other aspects of Baotou GRC components. To improve the material performance of components, there are two main goals: first, reduce the shrinkage value of components, including dry shrinkage value and cold shrinkage value, to reduce the shrinkage deformation of components; The second is to improve the elasticity of components and joint materials and increase the tensile deformation value
Published on: November 3, 2023 Number of hits: 4
-
GRG plate is a plate with a large number of micropores. In natural environment, porous body can absorb or release water. When the indoor temperature is high and humidity is low, microporous water is gradually released from the plate; When the indoor temperature is low and the humidity is high, the moisture in the air will also be absorbed. This release and breathing will form a "breathing" effect. This cyclic change of moisture absorption and release can adjust the indoor phase
Published on: October 23, 2023 Number of hits: 6
-
Baotou GRC cement European component is a composite material composed of cement, glass fiber and other materials, which has the characteristics of light weight, high strength, impact resistance and good weather resistance. However, due to the permeability of cement, GRC components may still be penetrated and corroded by water during long-term use. In view of this situation, a series of measures need to be taken to achieve GRC water
Published on: September 20, 2023 Number of hits: 20
-
The thermal insulation performance of Baotou GRC cement European components is mainly reflected in the characteristics of their materials. GRC adopts glass fiber reinforced cement, and glass fiber is an excellent thermal insulation material. Glass fiber has low thermal conductivity and excellent thermal insulation performance, which can effectively reduce heat conduction and loss and improve the thermal insulation effect of buildings. In addition, cement, fine sand and other materials also have certain
Published on: August 18, 2023 Clicks: 14
-
The thermal insulation performance of Baotou GRC cement European components is mainly reflected in the characteristics of their materials. GRC adopts glass fiber reinforced cement, and glass fiber is an excellent thermal insulation material. Glass fiber has low thermal conductivity and excellent thermal insulation performance, which can effectively reduce heat conduction and loss and improve the thermal insulation effect of buildings. In addition, cement, fine sand and other materials also have certain
Published on: August 8, 2023 Number of hits: 20
-
Grc exterior wall decoration components used in buildings need to be designed. The design and application design of Baotou GRC exterior wall decoration components should meet the requirements of relevant national building and structure standards. The design work of grc exterior wall decoration components includes: 1. building facade design (component application design). 2. Design of connection nodes between components and buildings. 3. Structure
Published on: July 21, 2023 Number of hits: 15
-
The detailed method of using Baotou GRC component caulking agent: 1. Prepare tool materials 1. When the water absorption of old walls or high-temperature brick joints in summer is too strong, the water can be stuck on the wall. 2. Scrape the mixed caulking agent onto the ceramic brick wall with mud board or rubber knife. 3. Wrap a thin sponge sheet with a rubber scraper or a plastic scraper, gently scrape off the feeding bucket on the brick surface, and mix evenly
Published on: May 12, 2023 Clicks: 20
-
1. Baotou GRC surface decoration effect treatment: treat GRC surface to obtain GRC product surface with specific effect. GRC products are used for decoration, but the decoration effect is determined according to Party A's requirements. Different decoration requirements determine our different surface treatment methods. Generally, this procedure is carried out after GRC products fall out of the mold. Generally
Published on: April 8, 2023 Number of hits: 20
-
Baotou GRC cement European component is a fiber cement composite material with alkali resistant glass fiber as reinforcement and cement mortar as base material. What are its requirements for cement? C in GRC component is fast hardening sulphoaluminate cement, which is a component of fast hardening high-strength cement series in characteristic cement. It is an early strength water made of anhydrous calcium sulphoaluminate and dicalcium silicate
Published on: March 31, 2023 Number of hits: 24
-
At present, the main way to solve the cracking problem is to improve the material performance and installation structure of Baotou GRC. To improve the material performance of components, there are two main goals: first, reduce the shrinkage value of components, including dry shrinkage value and cold shrinkage value, to reduce the shrinkage deformation of components; The second is to improve the elasticity of components and joint materials and increase the tensile deformation value. Through this "one
Published on: February 13, 2023 Clicks: 19
-
Clean the surface of Baotou GRC components to obtain specific GRC product surface. GRC This product is used for decoration. Different decoration requirements determine our different surface treatment methods. Generally, after the GRC product is separated from the mold, water milling, pickling, sand blasting, stone chiseling, coloring, spraying and other methods are used to make the GRC surface
Published on: January 31, 2023 Clicks: 19
-
For the installation method of Baotou GRC decorative line doors and windows, GRG material is a new type of decorative material, which not only has the advantages of waterproof performance, green performance, good playability, but also has excellent impact resistance, sound and light performance, and its randomness of modeling is sought after by everyone. Good sound insulation and absorption can be achieved according to the thickness of GRC material and different surface treatment methods
Published on: January 3, 2023 Number of hits: 39
-
Baotou GRC members are characterized by corrosion, fire resistance, high temperature resistance, crack resistance and low permeability. Therefore, it is used in construction, wharf, tunnel and other industries. The installation method of non bearing GRC Roman column is the same as pouring concrete from the upper opening after installation. The difference lies in carrying capacity. GRC Roman column shall be installed before covering, otherwise, concrete cannot be poured
Published on: February 7, 2023 Clicks: 31
-
The mould shall be made in strict accordance with the dimensions and specifications of the drawings. From the aspects of installation and production, the parting shall be comprehensively considered, and the countersunk bolt position and welding point shall be reserved. The mold of Baotou GRC finished components shall consider the product demoulding, and shall not be clamped. The countersunk bolt position shall be drilled vertically, and the deformed mold shall not be put into production. Batch: the same batch consists of components with the same raw materials, the same process and the same specifications
Published on: December 8, 2022-12 Number of hits: 23
-
The sandstone relief on Baotou GRC products is a combination of sculpture and painting, which is a sculpture with ups and downs on the plane. GRC products also have rich forms. At the same time, sandstone relief is also a kind of sculpture currently used, which can be carved on sandstone. Many buildings built with sandstone reliefs still have beautiful styles and charm. 1. Avoid dust and dirt
Published on: December 1, 2022-12 Number of hits: 26
-
GRC lines are used in building decoration materials. Because of their unique appearance and excellent quality, they stand out in the market. If grc lines are not properly maintained or for other reasons, it will lead to leakage, what is the cause of leakage? Causes for leakage of Baotou GRC line: 1. GRC line is damaged by repeated freeze-thaw cycles; 2. GRC line filled with ceramsite concrete
Published on: November 26, 2022-13 Number of hits: 33
-
The connection method of installing Baotou GRC components on the building wall includes: connecting the components to the wall through the connecting plate, that is, connecting the components to the connecting plate with bolts, and then connecting the connecting plate to the wall or the embedded parts on the wall with expansion bolts or welding. Fix the component directly on the wall with the expansion pin: 1. The bolt passes through the frame of the component and fixes the component on the wall; 2.
Published on: November 16, 2022-10 Clicks: 31
-
The sandstone relief on GRC products is the combination of sculpture and painting, which is a sculpture with ups and downs on the plane. Baotou GRC products also have rich forms. At the same time, sandstone relief is also a kind of sculpture currently used, which can be carved on sandstone. Many buildings built with sandstone reliefs still have beautiful styles and charm. How to maintain GRC products
Release time: 2022-11-09 Number of hits: 26
-
1. Cement: Generally used for GRC cement, it mainly includes quick hardening sulphoaluminate cement, low alkalinity sulphoaluminate cement, ordinary Portland cement and white Portland cement. 2. Fiber: The fiber used in Baotou GRC material shall be alkali resistant glass fiber, including alkali resistant glass fiber roving, alkali resistant glass fiber chopped yarn and alkali resistant glass fiber gridding cloth. Europe and America
Published on: September 27, 2022 Clicks: 45
-
The flat decoration of components with different types, specifications and sizes of Baotou GRC shall meet the requirements of JC/T940, with the length or width not less than 120mm and the thickness not less than 8mm. GRC line thickness and structure selection (1) The thickness of thin shell components is about 8~15mm, which is suitable for products with smooth shape and simple process, such as line plate and general column
Published on: September 16, 2022 Clicks: 34
-
The sandstone relief on Baotou GRC products is a combination of sculpture and painting, which is a sculpture with ups and downs on the plane. GRC products also have rich manifestations. At the same time, sandstone relief is also a kind of sculpture currently used, which can be carved on sandstone. Many buildings built with sandstone reliefs still have beautiful styles and charm. 1. Avoid dust and stains
Published on: September 8, 2022 Clicks: 26
-
Nowadays, the decoration of the construction industry is gradually inclined to the selection of GRC components. The buildings decorated with GRC components have beautiful and gorgeous appearance, and GRC components have various styles, which can be installed according to personal preferences. As we all know, GRC members are mainly connected by steel bars during construction, but after a period of use, if the steel bars are not maintained properly, it is easy to rust
Published on: August 11, 2022 Clicks: 34
-
Because there are gaps between the GRC components of Baotou and between the components and buildings, it is necessary to use caulking agent to caulk. Before caulking, clean the greasy dirt in the gap. If necessary, flush the floating ash and loose sand ash with a fine water pipe. Scrape the prepared caulking agent at the gap in batches with mud board or rubber knife, and squeeze tightly. Wrap the sponge with plastic scraper or rubber scraper, and gently scrape off the gap GR
Published on: July 27, 2022 Clicks: 40
-
What details should be paid attention to during the construction of the embedded parts of Baotou GRC components? GRC components are used in the construction field. GRC components bring good visual sense to people. GRC is made of aggregate with glass fiber as reinforcement and sulphoaluminate low alkali cement as binder. Through spraying, mold erection pouring, extrusion, slurry and other production processes, a light and high strength
Published on: July 21, 2022 Number of hits: 25
-
The quality of GRC mold is directly related to the quality of the product. The mold with fuzzy edges and corners and inaccurate dimensions cannot be used for GRC products. The facilities of the mold workshop need to be improved. There are working platforms, various measuring tools, aluminum alloy strips, cutting machines, cutters, etc., There are many processes and high size requirements, so the indoor space is large and the light is bright. Mold quality, usage times and product quality
Published on: July 7, 2022 Clicks: 41
-
GRC is a common construction method in the construction industry. We often use GRC decorative lines in construction. GRC lines have been used in building decoration materials because of their appearance and excellent quality. GRC lines stand out in the market, but if improper maintenance and other reasons will lead to water leakage, what is the reason? How about GRC line leakage? Baotou
Published on: June 30, 2022 Clicks: 26
-
At present, GRC components are characterized by corrosiveness, fire resistance, crack resistance and low permeability. Therefore, it has been applied in construction, wharf, tunnel and other industries. The GRC in Baotou GRC component is a base material composed of alkali resistant glass fiber as reinforcement, sulphoaluminate low alkali cement as binder, and appropriate aggregate. In short, it is modified cement
Published on: June 21, 2022 Clicks: 22
-
Ten key steps for installing GRC components? Customers who are unfamiliar with this industry. At present, GRC components have the characteristics of corrosiveness, fire resistance, crack resistance and low permeability. Therefore, it has been applied in construction, wharf, tunnel and other industries. Next, let's share GRC: Baotou GRC wire material adopts fast hardening sulphoaluminate
Published on: June 15, 2022 Clicks: 30
-
What is the difference between GRC and light concrete? GRC material is a kind of glass fiber reinforced cement, which has the characteristics of light weight, high strength, high toughness, water resistance, incombustibility, sound insulation, heat insulation, easy processing, etc., and occupies a position in buildings. Next, the daily maintenance and splicing processing method of GRC lines: Baotou GRC production process flow: mold making according to the drawing → rebar connection
Published on: June 10, 2022 Clicks: 28
-
Check the positioning line of the parts and install the connecting corner according to the positioning line. The connection angle adopts special profiled steel plate connectors, and the size and size can be customized or customized according to the drawing requirements. One end of the rib of the reinforcement frame is welded with the embedded parts. At the end of the year, the main structure of frame beam and plate column or the seismic structural column of floor or ring beam shall be welded with the embedded parts. Non load bearing Baotou GRC roller
Published on: 2022-05-31 Number of hits: 26
-
In order to improve the performance of concrete, save water and adjust the strength grade of concrete, some admixtures will be added to GRC members. Admixtures added in GRC components are mainly natural or artificial powder minerals, which can improve the performance of concrete when mixing. There are mainly the following types of admixtures often added in Baotou GRC components: 1)
Published on: 2022-05-26 Number of hits: 20
-
What are the characteristics of GRC European pendants? For customers who are not familiar with this industry, there are such problems. At present, GRC components are characterized by corrosion, fire resistance, high temperature resistance, crack resistance and low permeability. Therefore, it is used in construction, wharf, tunnel and other industries. Next, let's share the GRC decoration line: Baotou GRC products are based on the frost resistance test of concrete
Published on: 2022-05-19 Number of hits: 20
-
Baotou GRC members are mainly connected and fixed by embedded reinforcement and steel frame or embedded parts on the main structure. If the GRC component cracks due to the decoration of embedded reinforcement, it will lead to component fracture, resulting in potential safety hazards. Therefore, the reinforcement shall be strictly controlled not to rust. So how to improve the rust prevention ability of rebar? 1. Use of reinforcement: use corrosion resistant steel in concrete
Published on: May 11, 2022 Clicks: 20
-
The application of BM technology in the construction and installation of GFRC curtain wall panels? As we all know, Baotou GRC exterior wall decoration components are thin, light, high strength, high toughness, good impact resistance, uniform fiber distribution, good crack resistance, simple fabrication, rich modeling and wide application. The installation method of non bearing GRC Roman column is the same as pouring concrete from the upper opening after installation.
Published on: 2022-05-07 Number of hits: 20
-
GRC components are used in the construction field. GRC components give people a good sense of vision. What materials are the main components of Baotou GRC building components made of? The following is: the design of GRC exterior wall decoration components includes: building elevation design (component application design); Connection node design of components and buildings; Component design. GRC exterior wall decoration
Published on: April 15, 2022 Clicks: 28
-
The color of Baotou GRC components is the language of architecture. For buildings, paint is generally required except for dry hanging, wet pasting of marble or pasting of ceramic tiles. It is well known that the exterior surface of buildings can be painted instead of plastered. Due to the good alkalinity of ordinary Portland cement, the PH value is between 11-13. If the paint does not curl and fade, wait for wall cement PH
Published on: April 9, 2022 Clicks: 20
-
Baotou GRC decorative line is a new type of building material, so there are high requirements for the quality of the material. So how should we make the GRG decorative line material not crack? In order to prevent GRG material from cracking, the machine shall be used to open the mold to ensure that the difficult processing precision of GRG is modeling and mold opening. Good raw materials shall be used and the joints shall be treated by technical means.
Published on: April 2, 2022 Number of hits: 25
-
Baotou GRC decorative component is a new decorative material, which can fully replace traditional cement products and is suitable for modern decorative buildings. GRC components can not only reflect European style. The classical and elegant decoration style can also ensure that the main building has no cold and hot effects; Especially compared with the European style of high-rise buildings, the installation of traditional cement components is very difficult and the construction period is long. Simultaneous length
Published on: March 17, 2022 Clicks: 26
-
The causes and solutions of GRC line leakage are as follows: 1) polymer mortar plastering layer and waterproof coating layer on the surface of GRC line are not constructed according to the construction design drawings; After the 29-12 experiment in Jinyuan Community, the external wall insulation was removed, and the main cause of water leakage was determined through the irrigation test, and the GRC line leakage was analyzed. 2)G
Published on: March 11, 2022 Clicks: 26
-
Many users usually compare marble with GRC. Next, Baotou GRC manufacturer will introduce to you the performance comparison between GRC products and marble: 1. Green environmental protection: GRC products are made of cement, alkali resistant fiber and sand, without radioactive substances. It is recognized as a green, environmentally friendly and renewable product. 2. Exquisite style: GRC is
Published on: February 25, 2022 Number of hits: 30
-
Baotou GRC board has the characteristics of simple construction, convenient design, short cycle, light weight, etc. It can flexibly design different shapes. Therefore, most people prefer GRC series products when decorating. How is the GRC board installed? How to control the error of GRC sheet during installation and positioning? 1) Positioning and setting out
Published on: February 12, 2022 Clicks: 28
-
GRC is short for GlassfiberReinforced Concrete in English and is called glass fiber cement in Chinese. GRC is a kind of fiber cement composite material, which is made of alkali resistant glass fiber as the main reinforcing material, and mixed with special cement and mortar. It can add different pigments on the surface and achieve the shape desired by the designer,
Published on: January 19, 2022 Clicks: 36
-
What is the skeleton size of GRC members? Reinforced glass fiber cement shall be used for Baotou GRC decorative components, and the diameter of reinforcement of GRC components shall not be less than 6. The spacing is 400mm, and the geometric dimension should not exceed 1000mm. Scientifically configure the sector according to the construction needs of GRC components. The diameter and spacing of reinforcement shall be
Published on: January 13, 2022 Clicks: 92
-
The mold is needed to manufacture the Baotou GRC Roman column, and how is it that the mold has fewer times of mold turnover during use? Let's get to know each other. The mold of GRC Roman column was added with too much silicone oil in the manufacturing process, which damaged the molecular weight of silicone, so the mold would have less times of mold turnover and not durable. If the small patterns of the product are made
Published on: January 8, 2022 Number of hits: 33
-
EPS has the advantage of exterior decorative lines. (1) The advantages of the lightweight Baotou EPS exterior decoration line compared with the traditional exterior decoration materials are light, convenient to carry and convenient to transport. Alkali resistant glass fiber and sulphoaluminate low alkalinity cement are used as traditional decorative materials, and suitable aggregates are added to form the base material. It is as heavy as gypsum line, which is inconvenient for transportation and installation,
Published on: December 31, 2021-13 Number of hits: 33
-
Both GRC components and cement components are widely used in real life, but there is a big difference in their use. So what is the difference between the two? According to material analysis: Baotou GRC component is a kind of fiber cement composite material, which is made of alkali resistant glass fiber as reinforcement material, cement mortar as matrix, and cement component
Published on: December 25, 2021 Number of hits: 50
-
[Baotou EPS component] Expanded Polystyrene (EPS) is a kind of lightweight polymer. The polystyrene resin is added into the foaming agent, and at the same time, it is heated and softened to generate gas to form a foam material with a hard closed structure. [Application field of Baotou EPS components], reduce underground or
Published on: December 13, 2021 Number of hits: 25
-
Compared with traditional lines, there are three kinds of waterproof Baotou EPS components: ① on-site mold concrete cast-in-place line: on-site mold concrete cast-in-place line, the template can only be used once, which is wasteful, easy to expand the mold, difficult to guarantee the geometric size, and difficult to achieve the effect of on-site artificial paint on the surface, not to mention the insulation performance. ② GRC precast line: G
Published on: December 6, 2021 Clicks: 31
-
Use of Baotou GRC: Baotou GRC can be widely used in office, business, residential buildings, corridors, kitchen partitions, production processes, simple installation and operation, and easy to master; GRC has a broad market prospect and is suitable for the development of investment entrepreneurs. However, the outstanding problems of ordinary magnesium partition board are: poor water resistance of the product, high water absorption rate of the surface
Published on: November 22, 2021-12 Number of hits: 32
-
How to control the quality of raw materials for Baotou GRC lines: 1. Alkali resistant glass fiber must be selected as the reinforcement material. Sulphoaluminate low alkalinity cement is used as cementing material, and the base material is made by mixing appropriate aggregates. The supplier shall provide the above raw material procurement certification procedures. 2. Sufficient glass fiber content must be ensured: check the bending strength of the manufacturer's GRC decorative parts
Published on: November 15, 2021-15 Number of hits: 38
-
Baotou GRC line maintenance method: 1. Before and during demoulding. After decoration, the mold is usually wrapped with clean polyethylene film, which can prevent the evaporation of the water contained in GRC and the impact of wind, while helping to maintain the heat of hydration. At the beginning of maintenance, GRC products should have sufficient strength to avoid damage during demoulding and handling. When temperature
Published on: November 8, 2021-10 Clicks: 37
-
The mould shall be made in strict accordance with the drawing size and specification. In terms of installation and production, full consideration should be given to mold separation, and reserved bolt sinking position and welding spot. The mold of finished GRC components must consider the product demoulding, and must not be stuck. The drill hole at the bolt sinking position must be vertical, and the deformed mold cannot be put into production. Batch: composed of components of the same raw material, process and specification
Published on: November 1, 2021 Number of hits: 60
-
Baotou grc component is a new type of building material popular in recent years. Because it can be made into any shape and surface, without joints, so as to meet the unlimited production space requirements of designers, make their own design unique, thus improving the taste and grade of works, widely welcomed by users and designers. Especially for opera houses, due to diffuse reflection and other acoustic requirements, g
Published on: October 25, 2021 Number of hits: 35
-
Baotou GRC Component Company teaches you how to install and fix components: 1) Line installation: a. The section specification is less than 8mm × 8 mm φ eight × 100 expansion bolts are directly punched on the red brick or concrete wall and welded with the embedded parts of the component (embedded parts and expansion bolts
Published on: October 18th, 2021 Clicks: 67
-
The rapid development of the construction industry has also led to the progress of related industries. At the same time, better new materials have emerged, which are slowly replacing traditional building materials. As for the common Baotou GRC material, its appearance and use make the design style more diversified. We all know that Baotou grg components are widely used, but why are they so widely used? In actual use, I
Published on: October 12, 2021-12 Number of hits: 41
-
GRC board, full name GlassfiberReinforced Concrete, Chinese name is glass fiber reinforced concrete. With alkali resistant glass fiber as reinforcement material, low alkali sulphoaluminate cement as gel material, and appropriate aggregate as binder, light weight is made by spraying, vertical die-casting, extrusion, slurry flow and other production processes. yes
Published on: October 8, 2021-10 Clicks: 44
-
Nowadays, with the development of buildings, more and more new lightweight partition boards have entered the market. Today, let's introduce the common lightweight partition boards in the market. 【1】 Polystyrene light partition board is a new type of light partition board that is widely seen at present. Mainstream boards are mainly used in shopping malls, living rooms, hotels, etc. 【2】
Published on: September 16, 2021 Clicks: 55
-
The appearance of Baotou EPS line decoration has won unanimous praise from consumers. What's the "magic" of this new decorative line? Why are EPS lines so popular? Now let's have a brief understanding of the small braid of Baotou partition board. 1. EPS lines are light in weight. The wire material is made of polystyrene as aggregate, and the finished product accounts for about
Published on: August 16, 2021 Clicks: 56
-
Baotou partition board shares with you: thermal insulation material refers to a system composed of a single thermal insulation material and other auxiliary materials, which is called system thermal insulation material. At present, there are the following insulation system materials: external wall insulation system: Baotou GRC expanded polystyrene board (or extruded polystyrene board) alkali resistant glass fiber mesh high polymer mortar, such as external wall insulation system, outside Beijing China Construction Institute
Published on: August 9, 2021 Number of hits: 65
-
When processing the base course of EPS foam plastic line, it is necessary to wait for the construction and installation of walls, windows, doors, openings and other construction procedures to be done as early as possible, and the project completion acceptance is qualified. Elimination of Baotou line base course: eliminate the residual dust, film remover and other stains on the concrete wall and the empty part of the puttying wall. The surface flatness deviation of bonded polystyrene insulation board shall not exceed 4mm, and
Published on: August 3, 2021 Clicks: 58
-
Those who are familiar with building materials know that when talking about Baotou EPS lines, they will naturally think of Baotou GRC lines of similar products. These two materials are very similar in appearance, but their "connotation" is completely different. Today we will talk about the difference between them: first, the main component of material. GRC wire. GRC is reinforced with alkali resistant glass fiber
Published on: July 27, 2021 Clicks: 64
-
The water contained in Baotou GRC line will not be evaporated in the early stage. The water contained in the product is used for hydration of cement and therefore develops its strength, reducing penetration and shrinkage. Because hydration is affected by temperature, the surrounding air should be kept at a suitable temperature during the curing process of products. 1. GRC products are generally thin wall and low water cement ratio, while GRC clevis
Published on: July 21, 2021 Clicks: 57
-
With the development of society, people's requirements for buildings are deepening day by day. The facade of buildings is beautiful and beautiful, which is the design pursuit of architects. How to change the shape of Baotou EPS lines through simple configuration of decorative lines (pieces)? Baotou GRC includes existing buildings to make them look new, which is inseparable from decorative lines and decorative products. Baotou EPS line EPS
Published on: July 20, 2021 Number of hits: 48
-
Overview of Baotou GRC decorative materials 1. GRC is a kind of composite material, which is made of alkali resistant glass fiber, mixed with high grade high-quality special cement, a variety of lightweight materials and embedded metal parts, through process precision casting. Grc components in inner mongolia are widely used in european style building lines in construction projects, which are characterized by high strength, light weight and low price. GRC products
Published on: July 14, 2021 Number of hits: 60
-
Baotou EPS line production equipment is a kind of equipment that needs to be compensated for geometric dimensions in order to make up for the differences in dimensions caused by slotting loss. However, in many cases, ordinary production equipment will encounter difficulties in processing, resulting in low production efficiency and can not meet people's use. What are the characteristics of EPS line production equipment to meet
Published on: July 13, 2021 Number of hits: 68
-
When Baotou GRC European style components are used in places full of temperature and humidity, they can also be damp proof. The water absorption rate of the tested product is only 0.3%, and the bone material has no other flavor. The limit value of radionuclide complies with the decoration standard determined in the orthodox material. After a clear modeling plan, the new sound absorption structure can be reorganized to achieve the purpose of sound insulation and absorption. Baotou EPS production
Published on: July 6, 2021 Clicks: 53
-
Baotou GRC European style components are used in the construction industry, which uses industrial production methods to build houses, including exterior walls, interior decoration, stairs, wallboards, balconies, bathrooms and other building parts, which are all in the industrial production line in the factory. It is produced on a large scale, and these building parts are assembled together like building blocks, The whole house is formed on the construction site
Published on: July 5, 2021 Number of hits: 50
-
As we all know, Baotou GRC is a chemical fiber concrete polymer material with alkali resistant glass fiber as the raw material for improvement and composite mortar as the base material. It is also a cement component for decoration design of building details. So there must be relevant standards and regulations for installation related to engineering buildings. Otherwise, improper operation may lead to life safety and other unnecessary damage
Published on: June 30, 2021 Clicks: 68
-
Baotou GRC is a new type of building material. The specific characteristics of the material are not very clear in some places. Baotou EPS will introduce the specific characteristics of GRC materials to you here, so that you can better understand and use GRC materials. (1) Light weight -- the unit weight of GRC material is 1.8-2.0T/M3, which is 1/5 lighter than reinforced concrete
Published on: June 29, 2021 Clicks: 52
-
Improper use or maintenance of EPS components in Baotou will easily lead to leakage of external insulation wall, which is mainly shown in the following aspects. Here is a brief introduction of Baotou GRC. (1) When the user installs the air conditioner on the air conditioning board with good external insulation, the holes for fixing the air conditioner drill are not sealed and waterproof, and some air conditioner holes are drilled on the wall at random to damage the protective surface layer, which will lead to wall seepage
Published on: June 24, 2021 Number of hits: 70
-
Baotou GRC manufacturer Xinmei New Building Materials believes that more attention should be paid to product quality while focusing on product sales. Only when the quality of products is guaranteed, can stable customers and enterprises have better development. So how to control the quality of raw materials for GRC lines? Baotou EPS will introduce to you. 1. Alkali resistant glass fiber must be used as reinforcement
Published on: June 23, 2021 Clicks: 50
-
The market of building materials made of GRC in Baotou is very good in recent years, and the market sales and user evaluation of fences made of GRC are also very good. Compared with fences made of other materials, GRC art fences are more distinctive in decoration and greening fences, and constantly enter enterprises and various commercial sites and families. Cement fence produced by Baotou GRC art fence sand
Published on: June 17, 2021 Clicks: 53
-
Baotou GRC lightweight insulation board has been recognized in the field of building external wall insulation, and its application effect in buildings is getting better and better. Baotou partition board is widely used in Baotou, and it is the main insulation material at present. The Baotou EPS editor today introduces the cement foam insulation board and composite cement foam board. In fact, the basic principles of both are the same, only
Published on: June 17, 2021 Clicks: 66
-
The texture and color of Baotou GRC plate can be adjusted through additives. Because of its excellent strength performance and large single size, it has achieved good application results in building curtain walls. Designers can flexibly shape the shape of GRC plates to meet the requirements of architectural design. Various properties of GRC plate are analyzed as follows: 1. Elastic modulus. By studying bending
Published on: June 10, 2021 Number of hits: 75
-
New building materials have the advantages of light weight, high strength, heat preservation, energy saving, soil saving and decoration. The use of new building materials not only greatly improves the function of the house, but also makes the inside and outside of the building more modern, meeting people's aesthetic requirements; Some new building materials can significantly reduce the self weight of buildings, create conditions for the promotion of light building structures, and promote the modernization of building construction technology,
Published on: June 5, 2021 Clicks: 104
-
Installation of Baotou GRC window cover: GRC cement components shall be installed along the outer wall of the window frame, and attention shall be paid to avoiding the plastering layer at the fastening position of expansion bolts. When installing the vertical window sideline or column to the elevation of each floor, pay attention to adjusting the vertical error. There are transverse members of steel frame in GRC. Before installation, use steel
Published on: 2021-05-29 Number of hits: 90
-
Light partition board, as its name implies, is a lightweight material. I don't know whether you have known about it before. It doesn't matter. Today, Baotou GRC will take you to understand what is light partition board. Lightweight Baotou partition board, also known as "lightweight fireproof partition board", "lightweight water"
Published on: May 22, 2021 Number of hits: 75
-
In the field of building external wall insulation, Baotou GRC lightweight insulation board has been recognized, and its application effect in buildings is getting better and better. The GRC insulation components produced by Baotou Xinmei New Building Materials are widely used in Heilongjiang, and Baotou partition board is the main insulation component at present. Baotou GR
Published on: 2021-05-19 Number of hits: 73
-
New building materials have the advantages of light weight, high strength, heat preservation, energy saving, soil saving and decoration. The use of new building materials not only greatly improves the function of the house, but also makes the inside and outside of the building more modern, meeting people's aesthetic requirements; Some new building materials can significantly reduce the deadweight of buildings, creating conditions for the promotion of light building structures, and promoting modern construction technology
Published on: May 10, 2021 Clicks: 82
-
Baotou GRC lines can be bonded to the wall. 1. According to the construction drawing, snap the positioning line (centerline or sideline) at the position where the grc component is to be installed. 2. When pasting grc components, the grid cloth should be turned over. If there are special circumstances, it can be directly pasted without turning over. The thin layer full bonding method is used for pasting, and the EPS component is forced to overflow the mortar from the periphery
Published on: April 28, 2021 Clicks: 87
-
Baotou EPS decorative line can prevent fire without emitting toxic substances. It is an environmentally friendly decorative building material product. EPS decorative lines are cut by computer numerical control, which is fast in production and has many varieties and models, such as lines, Roman columns, window covers, brackets, etc., and can be installed on the four sides of windows, door edges, eaves corners and wall bodies; Make the facade of the building more beautiful, and bring new
Published on: April 26, 2021 Clicks: 86
-
The advantages of Baotou EPS decorative line: (1) It is light in weight. The aggregate of EPS line is polystyrene, and the weight of the finished product is about 1/6 of that of GRC decorative line. One person can move and construct at will. It is also fireproof, waterproof, moth proof, mold proof and crack proof. Easy and simple construction, suitable for various indoor and outdoor decorative materials, it is a new green decorative material
Published on: April 21, 2021 Clicks: 58
-
Comparison of advantages between Baotou EPS line and traditional gypsum line and GRC cement line: EPS decorative line is a new building decoration material emerging in China in recent years, its appearance has caused great repercussions in the domestic design community, and has quickly been recognized and accepted by many domestic designers. Its appearance completely subverted the use of GRC and stone for exterior wall decoration
Published on: April 19, 2021 Clicks: 67
-
There are many similarities and differences between the exterior wall grc line and the gypsum line gypsum line. The major similarity is that there are often glass fiber components. It is made of plaster and glass fiber; Baotou GRC is made of low alkali concrete and hot-dip galvanized building steel bars, with higher compressive strength and longer service life. If the engineering project of grc component is larger, Guangyou grc decoration design can
Published on: April 12, 2021 Clicks: 106
-
The remarkable feature of EPS decorative line is its fire prevention function, but later on, on the basis of EPS insulation board, EPS insulation board has good fire prevention function. Today, Baotou EPS production line will briefly introduce the fire protection characteristics of EPS insulation board. Heat insulation and energy saving, fireproof EPS insulation board inherits the advantages of low thermal conductivity and large thermal storage coefficient of traditional EPS foam board
Published on: April 8, 2021 Number of hits: 79
-
What are the specific factors that cause the leakage of Baotou EPS lines? The common decorative components in our life are mainly cement components. Cement components are not only difficult to install when installing, but also the service life of cement components is not long. So now people will install EPS components when installing decorative components. EPS components are more than cement components
Published on: April 8, 2021 Clicks: 111
-
The foundation frame structure used, such as brick foundation or steel frame, concrete foundation frame or a combination of the three. Baotou GRC European style components on the ground must be subject to corresponding foundation treatment, while indoor GRC European style components must be calculated according to the ground and load conditions (including ground beam and steel beam, column and support plan). The basic framework generalizes the shape of natural mountain peaks into several
Published on: March 2, 2021 Number of hits: 66
-
Baotou GRC will introduce the main properties and technical parameters of GRC products: 1. Mechanical properties 1. Tensile strength: the tensile strength (of glass fiber concrete) is 4.0-5.0Mpa, and the bending limit is 7.5-9.0Mpa. 2. Flexural strength: (of glass fiber reinforced concrete) flexural initial crack strength 7.0-8.0Mpa, flexural limit
Published on: 2021-02-04 Number of hits: 120
-
The market of building materials made of GRC in Baotou is very good in recent years, and the market sales and user evaluation of fences made of GRC are also very good. Compared with fences made of other materials, GRC art fences are more distinctive in decoration and greening fences, and constantly enter enterprises and various commercial sites and families. Cement fence produced by Harbin GRC art fence sand
Published on: January 19, 2021 Clicks: 140
-
Baotou GRC European style components are used in the construction industry, which uses industrial production methods to build houses, including exterior walls, interior decoration, stairs, wallboards, balconies, bathrooms and other building parts, which are all in the industrial production line in the factory. It is produced on a large scale, and these building parts are assembled together like building blocks, The whole house is formed on the construction site
Published on: January 6, 2021 Clicks: 90
-
When GRC European style components are used in places full of temperature and humidity, they can also be damp proof. The water absorption rate of the tested product is only 0.3%, and the bone material has no other flavor. The limit value of radionuclide meets the decoration standard determined in the orthodoxy of materials. European style components can be used for regeneration, which is an energy-saving material. After a clear modeling plan, the new sound absorption structure can be reorganized,
Published on: December 22, 2020 Number of hits: 487
-
Baotou GRC European style components can be molded into shapes and surface forms, which can meet the imagination and creativity of designers and owners on the appearance of buildings, thus making the buildings look richer in decoration. Because the fineness of GRC materials at that time was not enough, GRC materials were rarely used for interior decoration or structure. However, since the 21st century, a large number of exquisite interior decoration
Published on: December 15, 2020 Number of hits: 174
-
The main raw material of Baotou GRC manufacturer is GRC, and its Chinese name is glass fiber reinforced cement, which is a fiber cement composite with alkali resistant glass fiber as reinforcement and cement mortar as matrix material. It can be expressed by shape, texture, texture and color. Designer's imagination. What is the color development trend of GRC components? For the future
Published on: December 8, 2020 Number of hits: 93
-
Advantages of Baotou GRC: "Improve shareholder value: good corporate governance is reflected in many intangible assets, including brand, corporate culture and reputation, which can have a positive impact on stock prices." Optimize the risk/return structure: through in-depth insight and analysis of risk impact, probability and potential return, achieve the survival of the fittest choice of the project;
Published on: November 10, 2020 Clicks: 97
-
The emergence of new things is in line with the historical development trend. The development of Baotou GRC building materials conforms to the requirements of the building materials market and meets the needs of the market. General buildings in cold regions need to add insulation boards to resist the cold in winter. Mixed thermal insulation sandwich wallboard is a commonly used thermal insulation material. What is the relationship between it and GRC lightweight wallboard? In fact, Baotou GRC lightweight wall
Published on: November 5, 2020 Number of hits: 77
-
Classification of embedded parts of Baotou GRC components 1. Galvanized flat steel embedded parts: the specifications are determined according to the weight of the components. Generally, galvanized flat steel specifications: 40mm long, 30mm wide, 3mm thick, with a spacing of 500mm. Flat steel drilling is connected by expansion bolts. 2. Embedded parts are divided into external detection, internal detection, direct detection and concealed parts, which are directly anchored to the wall or bolted to the installed steel frame
Published on: October 10, 2020 Clicks: 95
-
Baotou GRC refers to glass fiber reinforced cement composite material, which is a composite material composed of Portland cement mortar and alkali resistant glass fiber, and also contains admixtures and admixtures. GRC decorative lines belong to the most common component classification of GRC building detail decoration components. In a narrow sense, GRC decorative lines refer to: GRC cornice line, GRC door and window lining, GR
Published on: September 30, 2020 Clicks: 86
-
GRC is glass fiber reinforced cement, which means "taking alkali resistant glass fiber as reinforcement material, low alkalinity high-strength cement mortar as cementation material, and light inorganic composite material as aggregate." GRC has thin components, high expansion resistance, good impact resistance, low alkalinity, small free expansion rate, reliable crack resistance, stable quality, moisture resistance, thermal insulation
Published on: July 26, 2020 Number of hits: 79
-
Full name of GRC component: GRC building detail decoration component. Abbreviation of the specification: GRC building details. GRC building detail decoration components are often referred to as GRC components because their names are too long to remember. GRC building detail decoration component belongs to a kind of building component in a subitem decoration of detail engineering in building decoration engineering. Let the GRC of the header be
Published on: July 19, 2020 Clicks: 103
-
Baotou GRC decorative surface course is completed by adding pigment, colored aggregate and specific process into GRC ingredients. It is a material that expresses the designer's imagination through modeling, texture, texture and color. Its outstanding characteristics are that it has good tensile strength and bending strength, as well as good toughness. It is especially suitable for making decorative shapes and buildings with strong texture. can
Published on: July 12, 2020 Clicks: 83
-
GRC is a new building decoration material, glass fiber reinforced concrete, which can be said to be an upgraded version of ordinary concrete building materials. There are specific data on the technical parameters of this new concrete building material. Today, Baotou GRC shares with you the configuration method and parameters of waterproof concrete. Waterproof concrete can be divided into four types according to the preparation method: 1
Published on: June 24, 2020 Number of hits: 78
-
GRC component cracking has become a common problem in the construction industry at the early stage of use. There are very few experienced manufacturers in the industry, so we don't know the reason, let alone what to do. Now this problem has been solved. Baotou GRC believes that the fundamental solution to GRC light component cracking is to improve the material properties, installation and structure of components, as follows: improve the material properties of components
Published on: June 6, 2020 Number of hits: 99
-
When installing GRC members, they should be installed according to the preset datum line, and pay attention to the adjustment of levelness and perpendicularity. Baotou GRC will introduce the installation method of components as follows: 1. There are steel framework transverse components in GRC. Before installation, corner code or angle steel shall be fixed on the wall as the welding point with the steel framework. The section size of component is more than 300mm but less than 1000m
Published on: July 5, 2020 Number of hits: 69
-
We all know that GRC is a chemical fiber concrete polymer material with alkali resistant glass fiber as the raw material for improvement and composite mortar as the base material. It is also a cement component for decorative design of building details. So there must be relevant standards and regulations for installation related to engineering buildings. Otherwise, improper operation may lead to life safety and other unnecessary damage. that
Published on: June 16, 2020 Number of hits: 95
-
Baotou GRC is a new type of building material. The specific material characteristics are not very clear in some places. Baotou GRC will introduce the specific characteristics of GRC materials to you so that you can better understand and use GRC materials. In (1) lightweight -- GRC material volume weight is 1.8-2.0T/M3, which is 1/5 lighter than reinforced concrete
Published on: September 24, 2020 Clicks: 81
-
As for the installation time of GRC materials, Baotou GRC seems to have mentioned in the previous article. Today, I will explain to you that the installation time should be carried out as soon as possible after the completion of the scraping of the building facade. If it is carried out before the painting of the surface course, then the surface course decorative materials can be used to cover the gap during the installation of GRC materials. Many GRC decorative trims need to be installed inside
Published on: August 23, 2020 Clicks: 82
-
Next, Baotou GRC will introduce to you what kind of GRC European style components can be used to make good products: 1. Mold: high-temperature resin soft rubber mold can be used with a hard outer mold, which can be formed once, easy to demould, and perfect in shaping. 2. Cement: cement commonly used in GRC mainly includes quick hardening sulphoaluminate cement, low alkalinity sulphoaluminate cement, ordinary Portland cement and white silicon
Published on: September 7, 2020 Clicks: 81
-
There are many types of GRC cement components, most of which are in the construction industry, or there will be more garden construction projects, such as some cement bricks on the pavement, some products, or villas, which will require more grc cement components, such as reliefs, hotel decoration, and so on,
Published on: May 25, 2020 Number of hits: 69
-
GRC European components are GRC building detail decoration components. Everyone knows that the strength of GRC components directly affects the beauty and quality of the project. So what are the key technologies that affect the strength of GRC components? Baotou GRC will take you to understand: 1. Cement: the cement used to make GRC components mainly includes the following types: sulphoaluminate cement, Portland lime cement, Portland cement
Published on: September 15, 2020 Number of hits: 76
-
Baotou GRC European style component experts tell you that GRC is colorful, that is, GRC with finishes. GRC European style component facing layer and GRC fiber reinforced layer are formed in one step. This colorful decoration surface is completed by adding pigments, colorful aggregates and additives into GRC ingredients, as well as specific manufacturing processes. Through modeling, texture, texture and color table
Published on: May 15, 2020 Number of hits: 67
-
The installation of GRC components is very important in the whole building decoration. In addition to the quality of GRC components, the installation process is also related to the safety of the building. And then beauty. The specific installation methods of GRC cement components and how to deal with joints are described below. 1. Install according to the preset reference line, and pay attention to the adjustment of levelness and perpendicularity.
Published on: March 16, 2020 Number of hits: 84
-
The GRC component effect takes cement mortar as the main material, and a certain proportion of alkali resistant glass fiber is added to strengthen the hollow materials with a thickness of 2-3cm. It is lighter than pure cement, but not as heavy as the former. The bearing capacity is slightly better than EPS fabric, but it is about 2% higher than the former. Baotou GRC component is a part of the whole building, building details
Published on: November 13, 2019 Clicks: 90
-
What are the common applications of Baotou GRC components in the market? At present, the common GRC European component products in the market include GRC European component decoration products, GRC exterior wall panels, garden landscape products, light partition panels, GRC insulation boards, permanent tubular core molds of ventilation pipes, permanent templates, industrial building roof components, sound barriers, self supporting floors, irrigation
Published on: October 12, 2019 Clicks: 82
-
What design does Baotou GRC European style component construction organization have? 1. Preparation before construction (1) Technical preparation Prepare the construction plan of Baotou GRC project, and make written technical and safety disclosure to workers. (2) Material requirements 1) Hangers, connectors and connectors. 2) Spare parts: suspender, expansion bolt, rivet. 3) Materials selected according to design requirements
Published on: October 12, 2019 Clicks: 95
-
Baotou GRC manufacturer Xinmei New Building Materials believes that more attention should be paid to product quality while focusing on product sales. Only when product quality is guaranteed, can stable customers and enterprises have better development. So how to control the quality of raw materials for GRC lines? 1. Alkali resistant glass fiber must be used as reinforcement, and sulphoaluminate low alkalinity cement must be used as bonding material
Published on: September 12, 2019 Number of hits: 89
-
Baotou GRC produced by Xinmei New Building Materials is mainly composed of cement, sand, fiber and water. In addition, polymers, additives and other materials are added to improve the later functions. Cement: cement commonly used in Baotou GRC mainly includes quick hardening sulphoaluminate cement, low alkalinity sulphoaluminate cement, ordinary Portland cement and white Portland cement. Fiber: GRC
Published on: September 12, 2019 Clicks: 92
-
Baotou GRC component, as a popular decorative material in the current building material market, has an increasingly wide range of applications. The production process of Baotou GRC component is becoming increasingly perfect, and the installation of components also needs to follow certain installation skills and specifications. Before installation, the site dimensions shall be rechecked - positioning and setting out (snapping, hanging, hanging) - component assembly treatment (cutting, polishing)
Published on: September 7, 2019 Number of hits: 89
-
Baotou GRC lightweight thermal insulation board has been recognized in the field of building external wall thermal insulation, and its application effect in buildings is getting better and better. The GRC components produced by Baotou Xinmei New Building Materials are widely used in Heilongjiang, and are currently the main thermal insulation materials. Baotou GRC Editor today introduces the basic principles of cement foam insulation board and composite cement foam board
Published on: September 7, 2019 Clicks: 101
-
At present, the development of the whole building materials market has entered a stable period, and the development of the whole Baotou GRC light partition has entered a bottleneck period. All enterprises want to develop and want to expand outward constantly. The self conditions of building materials enterprises are mainly hard power and soft power. Among the many elements of building materials enterprise competitiveness, hard power mainly refers to disposable capital, equipment, labor
Published on: September 11, 2021 Clicks: 46
