Check the positioning line of the parts and install the connecting corner according to the positioning line. The connection angle adopts special profiled steel plate connectors, and the size and size can be customized or customized according to the drawing requirements. One end of the rib of the reinforcement frame is welded with the embedded parts. At the end of the year, the main structure of frame beam and plate column or the seismic structural column of floor or ring beam shall be welded with the embedded parts.
Non load bearing Baotou GRC Roman Column The installation method of is the same as that of the concrete poured from the upper opening after installation. The difference is load bearing GRC Roman columns should be installed first and then covered, otherwise the concrete cannot be poured, and non load bearing GRC Roman columns can be decorated with buildings first and then GRC Roman columns.
Whereas the naming of GRC component names should follow the simple, easy to identify, well spread and traditional expression principles. Therefore, the abbreviation of GRC architectural detail decoration component fully expresses the characteristics of material characteristics and application scope, which is standard and clear.
*Disclaimer: The reprinted content is from the network. If you have any objection, please contact us in time, and the network will delete it.
