Baotou GRC European style components are used in the construction industry, which is the use of industrial production methods to build houses, including exterior walls, interior decoration, stairs, wallboards, balconies, bathrooms and other building parts. These are all in the industrial production line in the factory. It is mass produced. These building parts are assembled together like building blocks, forming the whole house on the construction site.
This kind of industrial production has the advantages of controllable quality, controllable cost and controllable speed. Baotou EPS The construction period is only 1/3 of the traditional method. At the same time, the amount of labor is greatly reduced, and the construction site is free of dust, noise, sewage and other pollution.
The production lines of European style component products are mostly made of 1.5~3m/piece of exterior decoration materials, GRC European style components and multiple connecting devices are used to outline the external wall, because on the one hand, the dead weight is heavy, and the pressure borne by the equipment due to its own weight is uneven. Affected is that cracks will occur between adjacent joints. On the other hand, pipelines are connected through multiple roots in the equipment, Baotou partition board During construction, joints are usually filled with 1:2 cement mortar, whose thermal expansion coefficient is different from that of GRC European cement products. Crack formation; When there is GRC equipment, especially when there is no expansion joint left on the horizontal line, the expansion joint will crack or crack when the temperature changes, resulting in cracks.
Water seepage and wall pollution of GRC component pipeline. After the equipment is used, GRC European components will infiltrate into the rainwater when it rains, especially below the horizontal line, and the rainwater at the top of the line also flows to the wall along the line, reducing the accumulation on the line.. The ash is carried to the outer wall. Stain strips are formed on the exterior wall, which seriously pollute the wall and affect the appearance of the building. The main reason is that the line did not cut off the wall paint layer on the equipment line of the old building before painting, or paint the new building first, then repair the equipment line, and then repair. Second, because the horizontal line or the top cover of the chromatographic column is not inclined or drip line, rainwater enters the pipeline from the upper mouth of the pipeline, flows out from the lower mouth of the pipeline or flows along the wall, causing wall pollution.
*Statement of responsibility: The reprinted content is from the network. If you have any objection, please contact me in time, and I will delete it.
