Baotou EPS Line production equipment is a kind of equipment that needs to be compensated for geometric dimensions in order to make up for the differences in dimensions caused by slotting loss. However, in many cases, ordinary production equipment will encounter difficulties in processing, resulting in low production efficiency and can not meet people's needs EPS What are the characteristics of line production equipment to meet people's use needs? Let's take a look.
20 heating wires can be installed on the cutting frame, and 20 identical patterns or characters can be cut at the same time. Baotou partition board The machine adopts a self-developed special controller, which is used for touch key input. The user can directly input the 3B code of the pattern or text to be cut into the controller with a USB flash disk, and simple patterns can also be directly input through the controller. The display screen has the functions of displaying cutting patterns, tracking cutting, etc. The cutting speed is adjustable, and the movement speed is 4000mm/min. The parameter setting is simple and convenient. The machine has a travel protection function. When the travel exceeds the specified travel, the equipment will automatically protect and stop. In addition, it also has power off memory, reverse cutting and rotation, mirror symmetry, gap compensation and other functions.
Dual CPU structure, programming control integration, processing can be programmed on the same machine. On site data power failure memory, power on recovery, no maintenance. Baotou GRC The hardware of the automatic control system of the numerical control foam cutting machine is composed of CNC card, PLC, industrial computer and servo system. Through the special automatic control software developed by our company that meets the requirements of the thermal cutting process, Realize automatic programming (it is not necessary to enter complex and cumbersome codes with keyboard, but only through CAD drawing input, it is possible to process workpieces with complex shapes or patterns). The system can control the three-dimensional coordinates of the flame cutting head (the drive system is composed of the X, Y, Z three-axis servo motors. The specific action process is: under the control of the computer program, the X-Y axis servo motor drives the flame cutting head to walk according to the predetermined trajectory of the program, so as to cut the required shape on the workpiece plane.
*Disclaimer: The reprinted content is from the network. If you have any objection, please contact me in time, and I will delete it.
