EPS Cleaning method after waistline completion.
Baotou EPS After the waistline is completed, there will be some stains and floating ash left. In order to be beautiful, it is necessary to clean up the stains.
First, clean the remaining floating dust, stains and other sundries on the surface. Secondly, remove the concrete blocks, inclusions, hollows, etc. on the surface and repair them again. It is required that the surface flatness deviation of pasted polystyrene board shall not exceed 4mm. When out of tolerance, polish and protrude the EPS waist line, repair the concave part, and ensure the overall flatness is within 4mm.
During the installation and use of EPS waistline, if the selected materials are of poor quality, it will be difficult to clean and maintain them later. Therefore, when purchasing EPS waistline products, more comparison is also helpful to their long-term use effect.
*Disclaimer: The reprinted content is from the network. If you have any objection, please contact us in time, and the network will delete it.
