EPS Linear bonding grid cloth operation:

1. Re inspect the workpiece by EPS to see if there is any defect in the appearance, and the size should be consistent with the drawing.

2. Determine the plastering surface and sticking surface, and the mesh cloth specification shall be consistent with the drawing.

3. The mesh cloth, mesh cloth, mesh cloth and EPS workpiece shall be scraped and compacted. They shall be closely bonded, and the internal and external corners shall be clearly defined. The mesh cloth on the surface of bonded mortar shall be reserved for no less than 30~50mm lap joint, and special specifications shall be determined separately.

4. Cover the grid cloth EPS lines, and stack them neatly according to the number and batch.

*Disclaimer: The reprinted content is from the network. If you have any objection, please contact us in time, and the network will delete it.