1. Ensure uniform layout of protective mortar in advance Baotou EPS On the insulation board, the mesh cloth is buried in the mortar layer. It is strictly prohibited to lay the mesh cloth directly on the board surface and bond it with mortar coating;
2. At first, the mortar glue can control the flatness and perpendicularity. The second layer of mortar can only finish the surface and completely cover the mesh trace;
3. It is better to control 33.mm below the thickness of the protective layer and no more than 5mm;
4. The mixed fresh mortar materials shall be used up within 2 hours, and the outdated ones shall be discarded and shall not be put on the wall;
5. Ensure that the plastering at the interface of protruding components or other components of the external wall is full, in place, sealed and compacted;
6. The plastering surface of the new wall shall be waterproof or rain washed to avoid mortar strength and surface strength.
*Disclaimer: The reprinted content is from the network. If you have any objection, please contact us in time, and the network will delete it.
