-
At present, the main way to deal with the cracking problem is to improve the material performance, installation, structure and other aspects of Baotou GRC components. To improve the material performance of components, there are two main goals: first, reduce the shrinkage value of components, including dry shrinkage value and cold shrinkage value, to reduce the shrinkage deformation of components; The second is to improve the elasticity of components and joint materials and increase the tensile deformation value
Published on: November 3, 2023 Number of hits: 4
-
GRG plate is a plate with a large number of micropores. In natural environment, porous body can absorb or release water. When the indoor temperature is high and humidity is low, microporous water is gradually released from the plate; When the indoor temperature is low and the humidity is high, the moisture in the air will also be absorbed. This release and breathing will form a "breathing" effect. This cyclic change of moisture absorption and release can adjust the indoor phase
Published on: October 23, 2023 Number of hits: 6
-
Baotou GRC cement European component is a composite material composed of cement, glass fiber and other materials, which has the characteristics of light weight, high strength, impact resistance and good weather resistance. However, due to the permeability of cement, GRC components may still be penetrated and corroded by water during long-term use. In view of this situation, a series of measures need to be taken to achieve GRC water
Published on: September 20, 2023 Number of hits: 20
-
The thermal insulation performance of Baotou GRC cement European components is mainly reflected in the characteristics of their materials. GRC adopts glass fiber reinforced cement, and glass fiber is an excellent thermal insulation material. Glass fiber has low thermal conductivity and excellent thermal insulation performance, which can effectively reduce heat conduction and loss and improve the thermal insulation effect of buildings. In addition, cement, fine sand and other materials also have certain
Published on: August 18, 2023 Clicks: 14
-
The thermal insulation performance of Baotou GRC cement European components is mainly reflected in the characteristics of their materials. GRC adopts glass fiber reinforced cement, and glass fiber is an excellent thermal insulation material. Glass fiber has low thermal conductivity and excellent thermal insulation performance, which can effectively reduce heat conduction and loss and improve the thermal insulation effect of buildings. In addition, cement, fine sand and other materials also have certain
Published on: August 8, 2023 Number of hits: 20
-
Grc exterior wall decoration components used in buildings need to be designed. The design and application design of Baotou GRC exterior wall decoration components should meet the requirements of relevant national building and structure standards. The design work of grc exterior wall decoration components includes: 1. building facade design (component application design). 2. Design of connection nodes between components and buildings. 3. Structure
Published on: July 21, 2023 Number of hits: 15
-
The detailed method of using Baotou GRC component caulking agent: 1. Prepare tool materials 1. When the water absorption of old walls or high-temperature brick joints in summer is too strong, the water can be stuck on the wall. 2. Scrape the mixed caulking agent onto the ceramic brick wall with mud board or rubber knife. 3. Wrap a thin sponge sheet with a rubber scraper or a plastic scraper, gently scrape off the feeding bucket on the brick surface, and mix evenly
Published on: May 12, 2023 Clicks: 20
-
1. Baotou GRC surface decoration effect treatment: treat GRC surface to obtain GRC product surface with specific effect. GRC products are used for decoration, but the decoration effect is determined according to Party A's requirements. Different decoration requirements determine our different surface treatment methods. Generally, this procedure is carried out after GRC products fall out of the mold. Generally
Published on: April 8, 2023 Number of hits: 20
-
Baotou GRC cement European component is a fiber cement composite material with alkali resistant glass fiber as reinforcement and cement mortar as base material. What are its requirements for cement? C in GRC component is fast hardening sulphoaluminate cement, which is a component of fast hardening high-strength cement series in characteristic cement. It is an early strength water made of anhydrous calcium sulphoaluminate and dicalcium silicate
Published on: March 31, 2023 Number of hits: 24
-
At present, the main way to solve the cracking problem is to improve the material performance and installation structure of Baotou GRC. To improve the material performance of components, there are two main goals: first, reduce the shrinkage value of components, including dry shrinkage value and cold shrinkage value, to reduce the shrinkage deformation of components; The second is to improve the elasticity of components and joint materials and increase the tensile deformation value. Through this "one
Published on: February 13, 2023 Clicks: 19
-
Clean the surface of Baotou GRC components to obtain specific GRC product surface. GRC This product is used for decoration. Different decoration requirements determine our different surface treatment methods. Generally, after the GRC product is separated from the mold, water milling, pickling, sand blasting, stone chiseling, coloring, spraying and other methods are used to make the GRC surface
Published on: January 31, 2023 Clicks: 19
-
For the installation method of Baotou GRC decorative line doors and windows, GRG material is a new type of decorative material, which not only has the advantages of waterproof performance, green performance, good playability, but also has excellent impact resistance, sound and light performance, and its randomness of modeling is sought after by everyone. Good sound insulation and absorption can be achieved according to the thickness of GRC material and different surface treatment methods
Published on: January 3, 2023 Number of hits: 39
-
Baotou GRC members are characterized by corrosion, fire resistance, high temperature resistance, crack resistance and low permeability. Therefore, it is used in construction, wharf, tunnel and other industries. The installation method of non bearing GRC Roman column is the same as pouring concrete from the upper opening after installation. The difference lies in carrying capacity. GRC Roman column shall be installed before covering, otherwise, concrete cannot be poured
Published on: February 7, 2023 Clicks: 31
-
The mould shall be made in strict accordance with the dimensions and specifications of the drawings. From the aspects of installation and production, the parting shall be comprehensively considered, and the countersunk bolt position and welding point shall be reserved. The mold of Baotou GRC finished components shall consider the product demoulding, and shall not be clamped. The countersunk bolt position shall be drilled vertically, and the deformed mold shall not be put into production. Batch: the same batch consists of components with the same raw materials, the same process and the same specifications
Published on: December 8, 2022-12 Number of hits: 23
-
The sandstone relief on Baotou GRC products is a combination of sculpture and painting, which is a sculpture with ups and downs on the plane. GRC products also have rich forms. At the same time, sandstone relief is also a kind of sculpture currently used, which can be carved on sandstone. Many buildings built with sandstone reliefs still have beautiful styles and charm. 1. Avoid dust and dirt
Published on: December 1, 2022-12 Number of hits: 26
-
GRC lines are used in building decoration materials. Because of their unique appearance and excellent quality, they stand out in the market. If grc lines are not properly maintained or for other reasons, they will leak, what is the reason for the leak? Causes for leakage of Baotou GRC line: 1. GRC line is damaged by repeated freeze-thaw cycles; 2. GRC line filled with ceramsite concrete
Published on: November 26, 2022-13 Number of hits: 33
-
The connection method of installing Baotou GRC components on the building wall includes: connecting the components to the wall through the connecting plate, that is, connecting the components to the connecting plate with bolts, and then connecting the connecting plate to the wall or the embedded parts on the wall with expansion bolts or welding. Fix the component directly on the wall with the expansion pin: 1. The bolt passes through the frame of the component and fixes the component on the wall; 2.
Published on: November 16, 2022-10 Clicks: 31
-
The sandstone relief on GRC products is the combination of sculpture and painting, which is a sculpture with ups and downs on the plane. Baotou GRC products also have rich forms. At the same time, sandstone relief is also a kind of sculpture currently used, which can be carved on sandstone. Many buildings built with sandstone reliefs still have beautiful styles and charm. How to maintain GRC products
Release time: 2022-11-09 Number of hits: 26
-
1. Cement: Generally used for GRC cement, it mainly includes quick hardening sulphoaluminate cement, low alkalinity sulphoaluminate cement, ordinary Portland cement and white Portland cement. 2. Fiber: The fiber used in Baotou GRC material shall be alkali resistant glass fiber, including alkali resistant glass fiber roving, alkali resistant glass fiber chopped yarn and alkali resistant glass fiber gridding cloth. Europe and America
Published on: September 27, 2022 Clicks: 45
-
The flat decoration of components with different types, specifications and sizes of Baotou GRC shall meet the requirements of JC/T940, with the length or width not less than 120mm and the thickness not less than 8mm. GRC line thickness and structure selection (1) The thickness of thin shell components is about 8~15mm, which is suitable for products with smooth shape and simple process, such as line plate and general column
Published on: September 16, 2022 Clicks: 34
-
The sandstone relief on Baotou GRC products is a combination of sculpture and painting, which is a sculpture with ups and downs on the plane. GRC products also have rich manifestations. At the same time, sandstone relief is also a kind of sculpture currently used, which can be carved on sandstone. Many buildings built with sandstone reliefs still have beautiful styles and charm. 1. Avoid dust and stains
Published on: September 8, 2022 Number of hits: 25
-
Nowadays, the decoration of the construction industry is gradually inclined to the selection of GRC components. The buildings decorated with GRC components have beautiful and gorgeous appearance, and GRC components have various styles, which can be installed according to personal preferences. As we all know, GRC members are mainly connected by steel bars during construction, but after a period of use, if the steel bars are not maintained properly, it is easy to rust
Published on: August 11, 2022 Clicks: 33
-
Because there are gaps between the GRC components of Baotou and between the components and buildings, it is necessary to use caulking agent to caulk. Before caulking, clean the greasy dirt in the gap. If necessary, flush the floating ash and loose sand ash with a fine water pipe. Scrape the prepared caulking agent at the gap in batches with mud board or rubber knife, and squeeze tightly. Wrap the sponge with plastic scraper or rubber scraper, and gently scrape off the gap GR
Published on: July 27, 2022 Clicks: 40
-
What details should be paid attention to during the construction of the embedded parts of Baotou GRC components? GRC components are used in the construction field. GRC components bring good visual sense to people. GRC is made of aggregate with glass fiber as reinforcement and sulphoaluminate low alkali cement as binder. Through spraying, mold erection pouring, extrusion, slurry and other production processes, a light and high strength
Published on: July 21, 2022 Number of hits: 25
-
The quality of GRC mold is directly related to the quality of the product. The mold with fuzzy edges and corners and inaccurate dimensions cannot be used for GRC products. The facilities of the mold workshop need to be improved. There are working platforms, various measuring tools, aluminum alloy strips, cutting machines, cutters, etc., There are many processes and high size requirements, so the indoor space is large and the light is bright. Mold quality, usage times and product quality
Published on: July 7, 2022 Clicks: 40
-
GRC is a common construction method in the construction industry. We often use GRC decorative lines in construction. GRC lines have been used in building decoration materials because of their appearance and excellent quality. GRC lines stand out in the market, but if improper maintenance and other reasons will lead to water leakage, what is the reason? How about GRC line leakage? Baotou
Published on: June 30, 2022 Clicks: 26
-
At present, GRC components are characterized by corrosiveness, fire resistance, crack resistance and low permeability. Therefore, it has been applied in construction, wharf, tunnel and other industries. The GRC in Baotou GRC component is a base material composed of alkali resistant glass fiber as reinforcement, sulphoaluminate low alkali cement as binder, and appropriate aggregate. In short, it is modified cement
Published on: June 21, 2022 Clicks: 22
-
Ten key steps for installing GRC components? Customers who are unfamiliar with this industry. At present, GRC components have the characteristics of corrosiveness, fire resistance, crack resistance and low permeability. Therefore, it has been applied in construction, wharf, tunnel and other industries. Next, let's share GRC: Baotou GRC wire material adopts fast hardening sulphoaluminate
Published on: June 15, 2022 Clicks: 30
-
What is the difference between GRC and light concrete? GRC material is a kind of glass fiber reinforced cement, which has the characteristics of light weight, high strength, high toughness, water resistance, incombustibility, sound insulation, heat insulation, easy processing, etc., and occupies a position in buildings. Next, the daily maintenance and splicing processing method of GRC lines: Baotou GRC production process flow: mold making according to the drawing → rebar connection
Published on: June 10, 2022 Clicks: 28
-
Check the positioning line of the parts and install the connecting corner according to the positioning line. The connection angle adopts special profiled steel plate connectors, and the size and size can be customized or customized according to the drawing requirements. One end of the rib of the reinforcement frame is welded with the embedded parts. At the end of the year, the main structure of frame beam and plate column or the seismic structural column of floor or ring beam shall be welded with the embedded parts. Non load bearing Baotou GRC roller
Published on: 2022-05-31 Number of hits: 25
-
In order to improve the performance of concrete, save water and adjust the strength grade of concrete, some admixtures will be added to GRC members. Admixtures added in GRC components are mainly natural or artificial powder minerals, which can improve the performance of concrete when mixing. There are mainly the following types of admixtures often added in Baotou GRC components: 1)
Published on: 2022-05-26 Number of hits: 20
-
What are the characteristics of GRC European pendants? For customers who are not familiar with this industry, there are such problems. At present, GRC components are characterized by corrosion, fire resistance, high temperature resistance, crack resistance and low permeability. Therefore, it is used in construction, wharf, tunnel and other industries. Next, let's share the GRC decoration line: Baotou GRC products are based on the frost resistance test of concrete
Published on: 2022-05-19 Number of hits: 20
-
The application of BM technology in the construction and installation of GFRC curtain wall panels? As we all know, Baotou GRC exterior wall decoration components are thin, light, high strength, high toughness, good impact resistance, uniform fiber distribution, good crack resistance, simple fabrication, rich modeling and wide application. The installation method of non bearing GRC Roman column is the same as pouring concrete from the upper opening after installation.
Published on: 2022-05-07 Number of hits: 20
-
GRC components are used in the construction field. GRC components give people a good sense of vision. What materials are the main components of Baotou GRC building components made of? The following is: the design of GRC exterior wall decoration components includes: building elevation design (component application design); Connection node design of components and buildings; Component design. GRC exterior wall decoration
Published on: April 15, 2022 Clicks: 28
-
The color of Baotou GRC components is the language of architecture. For buildings, paint is generally required except for dry hanging, wet pasting of marble or pasting of ceramic tiles. It is well known that the exterior surface of buildings can be painted instead of plastered. Due to the good alkalinity of ordinary Portland cement, the PH value is between 11-13. If the paint does not curl and fade, wait for wall cement PH
Published on: April 9, 2022 Clicks: 20
-
Baotou GRC decorative line is a new type of building material, so there are high requirements for the quality of the material. So how should we make the GRG decorative line material not crack? In order to prevent GRG material from cracking, the machine shall be used to open the mold to ensure that the difficult processing precision of GRG is modeling and mold opening. Good raw materials shall be used and the joints shall be treated by technical means.
Published on: April 2, 2022 Number of hits: 25
-
Baotou GRC board has the characteristics of simple construction, convenient design, short cycle, light weight, etc. It can flexibly design different shapes. Therefore, most people prefer GRC series products when decorating. How is the GRC board installed? How to control the error of GRC sheet during installation and positioning? 1) Positioning and setting out
Published on: February 12, 2022 Clicks: 28
-
GRC is short for GlassfiberReinforced Concrete in English and is called glass fiber cement in Chinese. GRC is a kind of fiber cement composite material, which is made of alkali resistant glass fiber as the main reinforcing material, and mixed with special cement and mortar. It can add different pigments on the surface and achieve the shape desired by the designer,
Published on: January 19, 2022 Clicks: 36
-
The mold is needed to manufacture the Baotou GRC Roman column, and how is it that the mold has fewer times of mold turnover during use? Let's get to know each other. The mold of GRC Roman column was added with too much silicone oil in the manufacturing process, which damaged the molecular weight of silicone, so the mold would have less times of mold turnover and not durable. If the small patterns of the product are made
Published on: January 8, 2022 Number of hits: 33
-
Use of Baotou GRC: Baotou GRC can be widely used in office, business, residential buildings, corridors, kitchen partitions, production processes, simple installation and operation, and easy to master; GRC has a broad market prospect and is suitable for the development of investment entrepreneurs. However, the outstanding problems of ordinary magnesium partition board are: poor water resistance of the product, high water absorption rate of the surface
Published on: November 22, 2021-12 Number of hits: 32
-
How to control the quality of raw materials for Baotou GRC lines: 1. Alkali resistant glass fiber must be selected as the reinforcement material. Sulphoaluminate low alkalinity cement is used as cementing material, and the base material is made by mixing appropriate aggregates. The supplier shall provide the above raw material procurement certification procedures. 2. Sufficient glass fiber content must be ensured: check the bending strength of the manufacturer's GRC decorative parts
Published on: November 15, 2021-15 Number of hits: 38
