EPS The molding can be cut and sewn at any time, or completed after the external insulation layer of the external wall is bonded. The bonding strength of this mortar is very high. The slightly larger wall components will not fall off even when people walk on the grass after being pasted on the grass. The bonding strength is quite high.
EPS foam is a thermoplastic material, which contains 3 to 600000 independent bubbles per cubic meter of volume, and the air content is more than 98%. Because the air thermal conductivity is very small, and the air is enclosed in the foam, so it cannot convection, EPS is a material with good thermal insulation performance. This is why we use this material as the raw material of EPS production line. Welcome new and old customers to purchase it.
Baotou EPS Molding is a kind of material with good heat insulation performance. EPS molding is composed of EPS foam plastic. It is a thermoplastic material. Each cubic meter of volume contains 3-6 billion independent bubbles, containing more than 98% of the air volume. Because the air thermal conductivity is very small, and it is closed in the foam plastic, it cannot convection,
EPS molded board can be used on the external wall of the same building with a thickness smaller than other types of insulation materials. It has good moisture-proof performance, and can still maintain good heat insulation performance in humid environment, because it has a closed battery structure. It is suitable for building insulation with special requirements such as cold storage, and can also be used for exterior decoration of masonry buildings. Our EPS lines have good insulation performance. Our company specializes in providing EPS composite insulation lines. Welcome new and old customers to buy them.
