EPS The decorative line is mainly bonded with the wall surface by polymer mortar, which is made by mixing organic glue with inorganic cement mortar. It has a long service life and is firmly bonded. There are national standards and specifications, and it has been proved to be safe and reliable in a large number of engineering applications, thus avoiding the hidden danger of anchor bolt fixing construction and anchor bolt corrosion, It also thoroughly solves the problem of cold and hot bridge of external thermal insulation of external wall. Modeling is processed at will.
EPS lines adopt computer design modeling, automatic cutting, and short production period. The main feature of eps line: light weight. Easy installation. Using special bonding materials and methods, one person can install and construct, especially for large line projects, only bonding installation is required. There is no gap between lines. The same gap filling material as wall bonding is used between EPS decorative lines, and all gaps disappear, and no cracks will appear in future use. EPS linear aggregate is polystyrene, and the weight of finished product is about GRC About 1/6 of the decoration line, one person can move and construct at will. Paste firmly.
Baotou EPS At present, there is no report on the service life of thermal insulation materials in China, but they can be used for about 15 years!
(1) The cement shall be low alkalinity cement, cement slurry with cement water ratio of 1:10, pH value ≥ 10.5.
(2) Alkali resistance of glass fiber ≤ 20 years.
(3) A small amount of polymer, anti-aging agent and other admixtures in glass fiber reinforced GRC cement shall comply with relevant national/industrial technical standards.
(4) River sand is selected as aggregate for larger GRC components.
(5) Building hardware such as embedded steel parts/post bolts, connecting steel parts/bolts and GRC components shall be made of domestic Q235 carbon structural steel, which shall be hot-dip galvanized with a thickness of ≥ 45 μ m。
(6) E43 series welding rods shall be used for steel structure welding, and the weld quality shall not be lower than Grade III.
(7) The quality of lightweight GRC filler (ceramsite/perlite/?) shall comply with relevant national/industrial technical standards.
Disclaimer: The reprinted content is from the network. If you have any objection, please contact us in time, and the network will delete it
