about Baotou EPS In addition to the factors in the production process, the quality of decorative lines also needs to consider external factors. Let's look at which external factors are included.
Before construction, EPS All uneven parts on the line more than 1.6mm shall be polished and leveled, and then a layer of adhesive shall be laid on it with a stainless steel trowel, whose area is slightly larger than the mesh cloth on the entire EPS line, and the thickness is 1.6mm. Then, the alkali resistant glass fiber mesh shall be pressed into the adhesive immediately, and the alkali resistant glass fiber mesh shall be flattened from the periphery to avoid wrinkles. The corner of the wall, the side of the doors and windows of the alkali resistant glass fiber mesh, and the expansion joints shall be laid with reinforcing mesh. The reinforcing mesh shall be continuously wound at the corner, and the width of each side shall be ≥ 200mm. Alkali resistant glass fiber mesh cloth shall overlap each other, and the overlapping length shall not be less than 100mm. The thickness of the glue shall be such that the alkali resistant glass fiber mesh is buried in the glue. When it can be touched, apply two layers of glue with a trowel. After the completion of the external wall thermal insulation sub project and sub project of alkali resistant glass fiber mesh, the finished products shall be protected.
EPS decorative line shall protect the external wall insulation works from rain during construction and maintenance. Protective measures shall be taken to protect the corners of exterior walls and the openings of doors and windows, and it is forbidden to step on the windows; Anti pollution measures shall be taken at the feed inlet, and wall impact shall be prevented after the completion of the project. Surface. EPS production line strictly controls materials and each construction process. EPS production line and various auxiliary materials have strict quality standards. At the same time, the durability requirements of various materials are also strict. The external wall insulation system is manual, and a little carelessness will easily cause quality problems. The construction process should be reasonable and standardized, and should be carried out in accordance with the production line process.
Disclaimer: The reprinted content is from the network. If you have any objection, please contact me in time, and I will delete it.
