Produced by the company EPS Series products. The production plan is formulated according to the processing sequence and production plan of EPS decoration line and the actual needs of the site. Timely respond to the on-site feedback and make adjustments according to the situation. Composite adhesive mortar is used as the adhesive for polyphenyl EPS component, the full bonding method is used for small wires, and the point and circle bonding method is used for large wires. The EPS component is strongly pressed to make it suitable for the wall, with a filling degree of more than 80% and a seam width of no more than 3MM. The adhesive joint shall be connected and hooked, and the adhesive joint shall be filled, and the surface of EPS components shall be kept clean.
EPS decorative line is cut by computer numerical control, which can be quickly made, and there are many types and models, such as lines Roman Column , window covers, brackets, etc., which can be installed on the four sides of the window, the edge of the door, the cornice corner, and the wall; Make the exterior wall of the building more beautiful and bring new and different ideas to the architect.
EPS decorative line has many advantages and is widely used in exterior wall decoration. conventional GRC It is heavier than EPS decorative line and difficult to install in high-rise buildings. Long time use is prone to crack, poor durability and easy to fall off. The appearance of EPS decorative line makes up for the shortage of traditional materials. It is calculated according to the actual installation quantity and elongation meter. If the widening is greater than 200mm: calculate the normal area on the outer side of the bonding surface or the sum of the lengths of the three sides of the rectangle. The construction of walls requires EPS line fill. If the hidden surface of EPS filling material exceeds 1/2, the area of the extended area outside the line is calculated as 3/4.
*Disclaimer: The reprinted content is from the network. If you have any objection, please contact me in time, and I will delete it
