As our quality of life improves, we use it more and more Baotou EPS Roman Column What do you know about the processing technology of Roman columns, and what should be paid attention to in the use process?
Baotou EPS Stone columns are solid or hollow architectural decorative columns made of marble and granite, while Roman columns generally refer to special-shaped columns with several grooves machined along the bus direction on the outer surface. According to the cross section of the Roman column, its circumference is composed of straight line segments with equal dimensions and circular segments of concave parts with equal spacing. At the place close to the base and cap of the column, the grooves on the Roman column are usually not connected. Roman columns can be either monolithic columns processed from a whole block of stone, or columns spliced from several sections of columns, column bases, and column caps. As long as the processing accuracy of the equipment can meet the requirements, the seam and seam fit between various parts of the Roman column can meet the requirements.
For the processing of Roman columns, the preparation requirements of blanks are the same as those of ordinary columns. The process requirements for processing Roman columns are basically the same as those of ordinary columns, and only one slotting process is added. Therefore, the requirements for Roman column processing equipment are different. At least two diamond saw blade power heads that can move along the axis of the cylinder and rotate 0-360 degrees at the processing position are required, which are used to install a disc milling cutter with a slotted cutting section of arc shape for processing diamond agglomerations, and a mechanism that can determine the cylinder rotation angle. Generally speaking, on the CNC lathe, the cylinder billet rotation is driven by an AC servo motor, controlled by the CNC system, and can be indexed and positioned at any angle; They are equipped with a saw blade power head. As long as an auxiliary part is added to the power head, the saw blade can rotate 0-360 degrees. Its rotation control modes include manual, manual motor drive and CNC full automatic control. The CNC lathe can be used for the columns of Roman columns and column components combined with column bases and column covers.
Install a set of cylindrical rotary bearing and indexing auxiliary device, which can be processed on the CNC milling machine or other machine tools with 0-360 degree rotating saw blade power head, but pay attention to whether the vertical lifting distance of the cutter meets the requirements of the diameter of the processed product. The numerical control rope saw with the control system above two dimensions can also process the Roman column, but only the column part of the Roman column can be processed. There is also a special-shaped column similar to the Roman column, which is called the quincunx column in China. The perimeter of its cross section is equivalently connected by the convex parts of the circular curve. The milling cutter inlaid with concave diamond caking can be used to process this quincunx cylinder, and the equipment requirements are the same as those for processing Roman columns. Generally, Roman columns are decorated with matt or chiseled or burnt surface. In the case of matt decoration, the glossiness of the outer surface can reach the level after machining with diamond tools. If the surface of the Roman column needs polishing, polish the cylindrical part of its outer surface, because it is difficult to polish in the groove. If the groove surface needs to be bright, it must be manually polished with soft abrasive discs.
*Disclaimer: The reprinted content is from the network. If you have any objection, please contact me in time, and I will delete it.
