Simple construction is Baotou EPS An important advantage of components. No embedded parts and riveting parts are required during construction, and special bonding mortar can be directly used to bond on the wall foundation. The bonding strength of this mortar is high, and the slightly larger components will not fall off even when people walk on the wall foundation, which is far beyond the relevant acceptance standards of JG149-2003 Expanded Polystyrene Board Thin Plastered External Wall Thermal Insulation System. EPS The components can be cut and spliced at will during the construction process, or they can be bonded to the outside after the construction of the external wall insulation layer is completed.
Make EPS components according to customer drawings. It is cut and shaped by numerical control cutting equipment, with elegant appearance and fine texture.
EPS decorative line is a new type of exterior wall decorative line and component, which can completely replace the traditional cement（ GRC ）Components, more suitable for installation on the external wall EPS, XPS thermal insulation wall can not only reflect the European, classical and elegant decoration style, but also ensure that the external wall of the main building will not appear cold and hot bridge effect; Especially for European high-rise buildings, it is very difficult to install (GRC) cement components. Due to its heavy work at heights, there are casualties from time to time in China. The construction period is long, and cracks will appear after a long time, so the durability is poor. Therefore, the use of EPS decorative line will create a new era in the field of domestic modeling technology!
*Disclaimer: The reprinted content is from the network. If you have any objection, please contact us in time, and the network will delete it.
