夜上海品茶论坛_上海后花园爱上海_2023上海信息交流

What is the difference between GRC components and cement components?

Both GRC components and cement components are widely used in real life, but there is a big difference in their use. So what is the difference between the two? According to material analysis: Baotou GRC component is a kind of fiber cement composite material, which is made of alkali resistant glass fiber as reinforcement material, cement mortar as matrix, and cement component
Published on: December 25, 2021 Number of hits: 50

Application fields of EPS components

[Baotou EPS component] Expanded Polystyrene (EPS) is a kind of lightweight polymer. The polystyrene resin is added into the foaming agent, and at the same time, it is heated and softened to generate gas to form a foam material with a hard closed structure. [Application field of Baotou EPS components], reduce underground or
Published on: December 13, 2021 Number of hits: 25

Compared with traditional lines, waterproof EPS components

Compared with traditional lines, there are three kinds of waterproof Baotou EPS components: ① on-site mold concrete cast-in-place line: on-site mold concrete cast-in-place line, the template can only be used once, which is wasteful, easy to expand the mold, difficult to guarantee the geometric size, and difficult to achieve the effect of on-site artificial paint on the surface, not to mention the insulation performance. ② GRC precast line: G
Published on: December 6, 2021-10 Number of hits: 30

Preliminary Analysis on Cracking of GRC Members

Baotou GRC lightweight components are mainly made of alkali resistant glass fiber as reinforcement material and sulphoaluminate low alkalinity cement as cementation material. They are mixed with suitable aggregates through production processes such as spraying, formwork erection, pouring, extrusion and grouting. In the early days, it was mainly used for GRC light hollow partition board, GRC composite exterior wall board, GRC grid panel, and GRC light slab. With production technology
Published on: November 29, 2021-14 Clicks: 54

Application scope of GRC component products

Use of Baotou GRC: Baotou GRC can be widely used in office, business, residential buildings, corridors, kitchen partitions, production processes, simple installation and operation, and easy to master; GRC has a broad market prospect and is suitable for the development of investment entrepreneurs. However, the outstanding problems of ordinary magnesium partition board are: poor water resistance of the product, high water absorption rate of the surface
Published on: November 22, 2021-12 Number of hits: 32

GRC line quality control

How to control the quality of raw materials for Baotou GRC lines: 1. Alkali resistant glass fiber must be selected as the reinforcement material. Sulphoaluminate low alkalinity cement is used as cementing material, and the base material is made by mixing appropriate aggregates. The supplier shall provide the above raw material procurement certification procedures. 2. Sufficient glass fiber content must be ensured: check the bending strength of the manufacturer's GRC decorative parts
Published on: November 15, 2021-15 Number of hits: 38

GRC line maintenance method

Baotou GRC line maintenance method: 1. Before and during demoulding. After decoration, the mold is usually wrapped with clean polyethylene film, which can prevent the evaporation of the water contained in GRC and the impact of wind, while helping to maintain the heat of hydration. At the beginning of maintenance, GRC products should have sufficient strength to avoid damage during demoulding and handling. When temperature
Published on: November 8, 2021-10 Clicks: 37

GRC component mould requirements

The mould shall be made in strict accordance with the drawing size and specification. In terms of installation and production, full consideration should be given to mold separation, and reserved bolt sinking position and welding spot. The mold of finished GRC components must consider the product demoulding, and must not be stuck. The drill hole at the bolt sinking position must be vertical, and the deformed mold cannot be put into production. Batch: composed of components of the same raw material, process and specification
Published on: November 1, 2021 Number of hits: 60

Method of grc material not cracking

Baotou grc component is a new type of building material popular in recent years. Because it can be made into any shape and surface, without joints, so as to meet the unlimited production space requirements of designers, make their own design unique, thus improving the taste and grade of works, widely welcomed by users and designers. Especially for opera houses, due to diffuse reflection and other acoustic requirements, g
Published on: October 25, 2021 Number of hits: 35

Installation and fixing method of grc decorative components

Baotou GRC Component Company teaches you how to install and fix components: 1) Line installation: a. The section specification is less than 8mm × 8 mm φ eight × 100 expansion bolts are directly punched on the red brick or concrete wall and welded with the embedded parts of the component (embedded parts and expansion bolts
Published on: October 18th, 2021 Clicks: 67

194 in total 10 entries per page Page: 8/20

夜上海品茶论坛