夜上海品茶论坛_上海后花园爱上海_2023上海信息交流

Difference between grc line and gypsum line

There are many similarities and differences between the exterior wall grc line and the gypsum line gypsum line. The major similarity is that there are often glass fiber components. It is made of plaster and glass fiber; Baotou GRC is made of low alkali concrete and hot-dip galvanized building steel bars, with higher compressive strength and longer service life. If the engineering project of grc component is larger, Guangyou grc decoration design can
Published on: April 12, 2021 Clicks: 106

How to remove the odor after the decoration of EPS lines?

No matter the house you just bought or the house you just renovated, there will always be some unpleasant or pungent smell. If you smell more of these pungent smells, your health will be damaged. The technical system of Baotou EPS decorative line production line is mature, and the problems still exist in our life, such as how to remove the unpleasant smell after finishing the decoration with EPS lines
Published on: April 12, 2021 Clicks: 80

Precautions for installing eps lines

The new decorative lines can prevent fire without emitting toxic substances, and are environmentally friendly decorative building materials. Eps component is widely used. In terms of this material, let's learn about the precautions for installing EPS lines. First of all, site survey shall be carried out before installation, and the installation faces shall be flat and compact
Published on: March 29, 2021 Clicks: 77

What inspections are required for EPS foam components before construction?

In fact, in many European style buildings today, we can see EPS line materials. In this issue, we are going to talk about some inspections that need to be carried out before the construction of Baotou EPS foam components, hoping to help everyone: first, the ambient temperature at the construction site and the surface temperature of the base wall should not be lower than 5 ℃ within 24 hours after the construction, and the wind force should not be greater than 5,
Published on: March 24, 2021 Clicks: 81

Processing sequence and requirements of EPS decorative molding

The company produces EPS series products. The production plan is formulated according to the processing sequence and production plan of EPS decoration line and the actual needs of the site. Timely respond to the on-site feedback and make adjustments according to the situation. Composite adhesive mortar is used as the adhesive for polystyrene EPS component, the full bonding method is used for small wires, and the point and circle bonding method is used for large wires
Published on: March 17, 2021 Clicks: 93

What are the advantages of using EPS decorative lines on exterior walls

Maybe you are not unfamiliar with the EPS decorative line for architectural decoration. You may see masters working in your own home or elsewhere. From our title, we can see that we are going to talk about some knowledge about the EPS lines in Huangpi. In the title, we have explained that we want to talk to you about the benefits of using EPS lines for exterior walls. In the previous article, we have
Published on: March 11, 2021 Clicks: 81

What are the requirements of GRC European style components for antique decoration

The foundation frame structure used, such as brick foundation or steel frame, concrete foundation frame or a combination of the three. Baotou GRC European style components on the ground must be subject to corresponding foundation treatment, while indoor GRC European style components must be calculated according to the ground and load conditions (including ground beam and steel beam, column and support plan). The basic framework generalizes the shape of natural mountain peaks into several
Published on: March 2, 2021 Number of hits: 66

Main performance and technical parameters of GRC products

Baotou GRC will introduce the main properties and technical parameters of GRC products: 1. Mechanical properties 1. Tensile strength: the tensile strength (of glass fiber concrete) is 4.0-5.0Mpa, and the bending limit is 7.5-9.0Mpa. 2. Flexural strength: (of glass fiber reinforced concrete) flexural initial crack strength 7.0-8.0Mpa, flexural limit
Published on: February 4, 2021 Clicks: 121

External factors affecting the quality of EPS decorative lines

With regard to the quality of Baotou EPS decorative lines, in addition to the factors in the production process, external factors should also be considered. Let's look at which external factors are included. Before construction, all uneven parts on the EPS line more than 1.6mm shall be polished and leveled, and then a layer of adhesive shall be laid on it with a stainless steel trowel, whose area is slightly larger than the entire EPS line
Published on: January 12, 2021 Clicks: 96

How to prevent GRC European components from being damped during placement

When GRC European style components are used in places full of temperature and humidity, they can also be damp proof. The water absorption rate of the tested product is only 0.3%, and the bone material has no other flavor. The limit value of radionuclide meets the decoration standard determined in the orthodoxy of materials. European style components can be used for regeneration, which is an energy-saving material. After a clear modeling plan, the new sound absorption structure can be reorganized,
Published on: December 22, 2020 Number of hits: 489

86 in total 10 entries per page Page: 5/9

Industry News