夜上海品茶论坛_上海后花园爱上海_2023上海信息交流

Why do GRC Roman column formwork have less turnover?

The mold is needed to manufacture the Baotou GRC Roman column, and how is it that the mold has fewer times of mold turnover during use? Let's get to know each other. The mold of GRC Roman column was added with too much silicone oil in the manufacturing process, which damaged the molecular weight of silicone, so the mold would have less times of mold turnover and not durable. If the small patterns of the product are made
Published on: January 8, 2022 Number of hits: 34

EPS has the advantage of exterior trim

EPS has the advantage of exterior decorative lines. (1) The advantages of the lightweight Baotou EPS exterior decoration line compared with the traditional exterior decoration materials are light, convenient to carry and convenient to transport. Alkali resistant glass fiber and sulphoaluminate low alkalinity cement are used as traditional decorative materials, and suitable aggregates are added to form the base material. It is as heavy as gypsum line, which is inconvenient for transportation and installation,
Published on: December 31, 2021-13 Number of hits: 33

Compared with traditional lines, waterproof EPS components

Compared with traditional lines, there are three kinds of waterproof Baotou EPS components: ① on-site mold concrete cast-in-place line: on-site mold concrete cast-in-place line, the template can only be used once, which is wasteful, easy to expand the mold, difficult to guarantee the geometric size, and difficult to achieve the effect of on-site artificial paint on the surface, not to mention the insulation performance. ② GRC precast line: G
Published on: December 6, 2021 Clicks: 31

GRC line quality control

How to control the quality of raw materials for Baotou GRC lines: 1. Alkali resistant glass fiber must be selected as the reinforcement material. Sulphoaluminate low alkalinity cement is used as cementing material, and the base material is made by mixing appropriate aggregates. The supplier shall provide the above raw material procurement certification procedures. 2. Sufficient glass fiber content must be ensured: check the bending strength of the manufacturer's GRC decorative parts
Published on: November 15, 2021-15 Number of hits: 38

GRC component mould requirements

The mould shall be made in strict accordance with the drawing size and specification. In terms of installation and production, full consideration should be given to mold separation, and reserved bolt sinking position and welding spot. The mold of finished GRC components must consider the product demoulding, and must not be stuck. The drill hole at the bolt sinking position must be vertical, and the deformed mold cannot be put into production. Batch: composed of components of the same raw material, process and specification
Published on: November 1, 2021 Number of hits: 60

Types of new lightweight partition boards

Nowadays, with the development of buildings, more and more new lightweight partition boards have entered the market. Today, let's introduce the common lightweight partition boards in the market. 【1】 Polystyrene light partition board is a new type of light partition board that is widely seen at present. Mainstream boards are mainly used in shopping malls, living rooms, hotels, etc. 　　【2】
Published on: September 16, 2021 Clicks: 55

Baotou GRC soft power is still the focus of enterprises

At present, the development of the whole building materials market has entered a stable period, and the development of the whole Baotou GRC light partition has entered a bottleneck period. All enterprises want to develop and want to expand outward constantly. The self conditions of building materials enterprises are mainly hard power and soft power. Among the many elements of building materials enterprise competitiveness, hard power mainly refers to disposable capital, equipment, labor
Published on: September 11, 2021 Clicks: 46

Difference between GRC line and EPS line

Those who are familiar with building materials know that when talking about Baotou EPS lines, they will naturally think of Baotou GRC lines of similar products. These two materials are very similar in appearance, but their "connotation" is completely different. Today we will talk about the difference between them: first, the main component of material. GRC wire. GRC is reinforced with alkali resistant glass fiber
Published on: July 27, 2021 Clicks: 64

Production process of EPS line production equipment

Baotou EPS line production equipment is a kind of equipment that needs to be compensated for geometric dimensions in order to make up for the differences in dimensions caused by slotting loss. However, in many cases, ordinary production equipment will encounter difficulties in processing, resulting in low production efficiency and can not meet people's use. What are the characteristics of EPS line production equipment to meet
Published on: July 13, 2021 Number of hits: 68

How to prevent GRC from being affected with damp when it is placed? What are the treatment methods?

When Baotou GRC European style components are used in places full of temperature and humidity, they can also be damp proof. The water absorption rate of the tested product is only 0.3%, and the bone material has no other flavor. The limit value of radionuclide complies with the decoration standard determined in the orthodox material. After a clear modeling plan, the new sound absorption structure can be reorganized to achieve the purpose of sound insulation and absorption. Baotou EPS production
Published on: July 6, 2021 Clicks: 53

86 in total 10 entries per page Page: 3/9

Industry News